To reduce Google Meet data usage, turn on Limit data usage in the mobile app, or lower both send and receive resolution on a laptop. Turning off your camera does not stop other people’s video from reaching you. For a strict cellular budget, restrict the phone’s data connection rather than treating a saver switch as a hard cap.
This guide uses official Google and Apple instructions checked November 15, 2026. We did not measure a meeting or change a private account. The calculations below are examples, not a promise about how much your next call will use.

How much data does Google Meet use per hour?
There is no useful single hourly figure for every meeting. Google’s Meet network planning guidance lists separate upload and download requirements. Participants, layout and screen sharing affect bandwidth. Those planning figures are not a bill for a particular call.
For the units alone, a constant 1 megabit per second (Mbps) transfers about 450 megabytes in an hour using decimal units. If a hypothetical connection sustained 1 Mbps uploading and another 1 Mbps downloading, that would total about 900 MB before allowing for additional traffic. Counting just one direction would miss half of this example.
Actual calls do not necessarily hold those rates. Use a normal meeting’s meter readings to plan an allowance, and leave room for other apps. Do not spend scarce roaming data running a long test just to reproduce an online estimate.
Find the mobile saver setting for your account
Google’s Android data-saving instructions place Limit data usage under Meet > Menu > Settings. For meetings and Business or EDU Meet calls, look in General; personal accounts use Meeting settings.
The iPhone and iPad instructions also describe Menu > Settings > Data usage and privacy > Limit data usage for Meet saver mode. The same page lists General or Meeting settings for meetings. Follow the section matching your app and account rather than assuming every installation has one identical menu.
If a tutorial points to Calling settings > In-call settings > Data saving mode, that is the legacy-call route. Google’s calling transition guide says Meet saver mode replaces that legacy feature. Update the app before treating a missing old switch as a fault; the calling experience also depends on the other participants’ update status.
On a laptop, lower video in both directions
Open Meet’s Settings > Video. Google’s desktop video-quality guide separates what you send from what you receive. Choose the lowest picture quality that still lets you follow the meeting.
| Control | What changes |
|---|---|
| Send resolution: 360p | Your camera sends a lower-quality picture and uses less data. |
| Receive resolution: 360p, single feed | Other participants’ thumbnails turn off to save more data. |
| Receive resolution: Audio Only | You do not receive video. This does not itself describe your outgoing camera setting. |
Turning off your camera changes what you send; check receive quality separately if the meeting still shows other people. Google’s mobile video controls say you cannot manually adjust resolution in the Meet mobile app, so do not hunt for the desktop dropdowns on a phone.
Measure the connection that actually pays for the call
On iPhone, Apple’s cellular-usage guide shows app totals in Settings > Cellular. Find Meet, check the statistics period and confirm the selected data line if you use Dual SIM. Reset Statistics clears the totals, so save any readings you need first. For billing, compare with your carrier’s current-period meter.
On Pixel, Google’s app-data instructions use Settings > Network & internet > SIMs > App data usage. Select the time period and find Meet below the graph. Other Android brands can use different menus. These cellular counters do not measure calls carried entirely over home broadband.
- Record the relevant meter before a meeting you already intend to join.
- Note the duration, whether you used video, and which connection supplied internet.
- Read the same meter afterward and subtract the starting amount. Check again if the counter has not updated.
- Use that sample for a rough budget, keeping different connection types and meeting formats separate.
Suppose a 20-minute meeting adds 180 MB to the relevant counter. That sample works out to 9 MB per minute, or 540 MB for an hour if its rate continued. This is hypothetical arithmetic. A later meeting may behave differently, and a whole-device counter may include other traffic.
A laptop connected to a phone hotspot still spends mobile data. Apple’s Personal Hotspot guide confirms that the supplying iPhone or cellular iPad shares its cellular connection. In that setup, inspect the supplying plan’s hotspot allowance and meter, not the Meet app counter on a phone that never joined the meeting.
Protect a tight allowance without relying on a saver switch
Google warns that Meet can use a small amount of cellular data as backup while connected to WiFi. Its data guide recommends turning mobile data off to ensure WiFi-only use. That affects the phone’s other mobile-internet tasks too. On iPhone, Apple also lets you turn cellular access off for Meet alone; it then needs WiFi.
Android’s system Data Saver is different from Meet saver mode. Google’s Data Saver explanation says active apps can still use mobile data; most background activity waits for WiFi, with exceptions for unrestricted apps. It is not a guarantee that an active meeting cannot consume your allowance.
If you set a Pixel data limit, remember that it can switch mobile data off when reached, interrupting the meeting. A warning only alerts you. Start with the carrier’s remaining allowance, then decide whether the call belongs on broadband instead. For an iPhone-wide setting, see our Low Data Mode guide. If the problem is freezing rather than cost, use our video-call stability checks instead of assuming you need a larger plan.

